Barnstead GenPure Pro Type 1 Water Systems

  • Delivers up to 200L/day of Type 1 water on demand, using pre-treated water as a feed source.
  • Product flow rate up to 2 L/min with a pressurized feed of
  • Digital microprocessor control automatically monitors and stores faults from the past 4 weeks.
  • During standby, water will recirculate within the system at a user-defined time span.
  • Systems come complete with all consumables needed for immediate start-up.
  • Installation and maintenance is simple and user friendly.
  • Cartridges have quick-connections to remove the need for depressurizing the system for cartridge changes.
  • Cartridge pack is constructed of non-pigmented polypropylene and semi-conductor grade mixed bed ion exchange resins.
  • System will automatically switch to interval operation after it has been running for 2 hours.
  • Display background turns red when an error is displayed for easy identification of an error. Tiltable display for easy reading with illumination.
  • Continuous feed water monitoring alerts the user when feed water quality falls below the set point to prevent premature expiration of consumables.
  • System comes standard with a leak detector and shows an error if a leak occurs within the system.
  • Includes a UV lamp that emits both 185nm and 254nm wavelengths, ensuring organic removal and maintaining a bacteria-free environment. The UV lamp is followed by an organic-free component ensuring that resistivity is increased and ultra low organic levels are maintained.
  • An absolute 0.2µm polysulfone membrane filter is the final purification step as the water is being dispensed. The final filter is sterilizable using an autoclave.
  • Dispenser has an action radius of 24” (60cm). Dispensing arm is height adjustable and extendable. Available to be benchtop or wall-mounted.
  • Real time clock and code-protected operating system prevents unauthorized changes to system settings.
  • Conductivity measurement is performed with 2 high-precision measuring cells. A fully automatic check and calibration occurs prior to each measurement via a built-in reference resistance. The cell constants are 0.01/cm.
  • Temperature measurements are made by a platinum chip sensor with ±0.1ºC accuracy.
  • RS232 interface.
  • Installation and IQ/OQ validation protocols are available as needed.
  • Supplied with xCAD remote dispenser (bench version), ultrapure polisher cartridge, sterile 0.2µm filter, pressure regulator, leak detector and UV lamp. UV/UF and UV/UF-TOC models also come with an ultrafilter.
  • Power: 115-240V. CSA approved.
  • Warranty: 1 year (parts and labour).

    *Includes an inline ultrafilter for the removal of pyrogens. The system must allow for an extended ultrafilter flush as well as a 1 minute ultrafilter flush, which is initiated by the controls. The unit must also automatically flush the ultrafilter.

    ºReal-time TOC measurement combined with continuous monitoring of the intensity of the UV lamp will remove the risk of false TOC values due to decreasing UV intensity. A fault message will alert the user when the UV lamp intensity is no longer sufficient for accurate TOC measurements.


Manufacturer : Thermo Fisher Scientific

Please note: The prices shown may not reflect those specific to your company or organization. Please log in to continue.


Mouse over for a larger view

Scroll bar to see more details
Cat.#DescriptionDisplay showsProduct water hasOther informationMfg.#PriceQuantityEstimated Availability
966-154-02GenPure Pro UV/UF Type 1 water purification systemDispensing mode, Conductivity/resistivity and temperature measured for conductivity compensationResistivity up to 18.2 Mê-cm, <5 ppb TOC, pyrogen (bacterial endotoxin) levels of less than 0.001 EU/ml and bacterial counts less than 1 CFU/mlSee above*50131950Call for pricing  
Ships within one week
966-154-04GenPure Pro UV-TOC Type 1 water purification systemDispensing mode, TOC value, conductivity/resistivity, and temperature measured for conductivity compensationResistivity up to 18.2 Mê-cm, <5 ppb TOC and bacterial counts less than 1 CFU/mlSee above º50131948Call for pricing  
Ships within one week
966-154-06GenPure Pro UV/UF-TOC Type 1 water purification systemDispensing mode, TOC value, conductivity/resistivity, and temperature measured for conductivity compensationResistivity up to 18.2 Mê-cm, <5 ppb TOC, pyrogen (bacterial endotoxin) levels of less than 0.001 EU/ml and bacterial counts less than 1 CFU/mlSee above * and º50131922Call for pricing  
Ships within one week
966-154-08GenPure Pro UV Type 1 water purification systemDispensing mode, conductivity/resistivity and temperature measured for conductivity compensationResistivity up to 18.2Mê-cm, <5 ppb TOC and bacterial counts less than 1 CFU/ml-50131952Call for pricing  
Ships within one week
966-154-20Log printer for connection to RS232 port, 230V
DISCONTINUED


Parts & Accessories:

Cat.#DescriptionMfg.#PriceQuantityEstimated Availability
966-020-06Ultrapure polisher cartridge09.2005$1,492.39 EA  
Ships within one week
966-153-76Printer, for for use with all Nanopure unitsAY1137X1$1,349.17 EA  
Ships within one week
966-154-22Storage reservoir, 30L, to feed system06.5038$2,036.40 EA  
Ships within one week
966-154-26Disinfection cartridge09.2201$1,053.35 EA  
Ships within one week
966-154-300.2µm final filter09.1003$480.23 EA  
Ships within one week
966-154-32UV lamp09.2002$809.72 EA  
Ships within one week
966-154-34Ultrafilter50133980$1,909.64 EA  
Ships within one week



    
Image preview