Barnstead GenPure xCAD Plus Type 1 Water SystemsProduct number: 966-151.8
• Delivers ultrapure 18.2 Mê.cm water with consistent quality. • All GenPure systems exceed international standards ASTM Type 1, ISO 3696 Grade 1, ASTM D1193 and CLSI-CLRW. • Flow rate: up to 2L/min. • Conductivity: 0.055 µS/cm. Feed water conductivity: <2 µS/cm. • Bacteria: <1 CFU/ml. Particles: <1 (0.22µm/ml) • TOC: max 50 ppb. • Turbidity: <1.0 NTU. • Temperature: 2 to 35ºC. Temperature measurements are made by a platinum chip sensor with ±0.1ºC accuracy. • Pressure: 1.4 to 87 psi (0.1 to 6 bar). • xCAD Plus remote dispenser: Full system control in a compact design. xCAD is short for “Extended Control and Dispenser”. Action radium of 32” (80cm). • One-of-a-kind design provides all system controls at your fingertips. • Adjustable controller makes handling more practical and provides a clear view of critical settings. • Simultaneously dispense from up to 3 dispensers. Each system is supplied with a single xCAD plus remote dispenser. For increased flexibility, add 1 or 2 more xCAD plus dispensers. • Electronic dosing for fully automatic volume control of 0.01 to 65L with <2% accuracy. • Additional measuring cell monitors feed water conductivity. If the quality of the feed water drops below the set value, a fault message will immediately be displayed. • Source feed requirements: potable tap water, pretreated by reverse osmosis, ion exchange or distillation. • Aquastop quick-connect capability enables cartridge replacement within seconds, even mid-operation. • Real-time TOC monitoring for continual measurement of organic substances. • Continuous monitoring of UV intensity removes the risk of false TOC values due to diminished UV intensity. • Fault message alerts user when the UV lamp intensity is no longer efficient for accurate TOC measurements. • UV photo-oxidation 185/254nm reliably reduces the content of microorganisms and their metabolites. UV oxidation also reduces organic compounds in the water to ultra-low levels. • Leak detection alerts. • Conductivity cells are calibrated prior to each measurement via built-in reference resistance with cell constants at 0.01/cm. • GLP compliant documentation: real-time clock and code-protected operating system. • RS232 interface with adjustable send-interval. • Digital microprocessor control automatically monitors and stores fault from the last 4 weeks. • Systems can also be installed under the bench or wall-mount with included mounting brackets up to 2.5m (8ft) away from main system. • All systems include a wall bracket, ultrapure polisher cartridge, sterile 0.2µm filter, pressure regulator, UV lamp and/or ultrafilter where applicable. • Dimensions (unit, W x D x H): 14.6 x 13 x 24”; (xCAD, W x D x H): (benchtop) 10.2 x 21 x 28.5”; (wall mount) 10.2 x 21 x 25.8”. • Power: 90 to 240V. CSA approved.