edgeDO® allows the user to make fast, accurate measurements of dissolved oxygen using one of the Hanna edgeDO® digital sensors for Dissolved Oxygen. Once connected to the meter, the sensor is ready to measure dissolved oxygen along with temperature.
This meter comes with:
- edgeDO ® (HI 2004)
- Bench cradle
- Wall cradle
- Electrode holder
- USB cable
- HI764080 dissolved oxygen electrode
- HI7041S refill electrolyte solution
- 2 DO membrane caps
- 2 DO membrane cap o-rings
- 5 VDC Power Adapter
- Instruction Manual
- Quality Certificate
Specifications:
- Range: 0.00 to 45.00 ppm (mg/L) 0.0 to 300.0% 0.0 to 50.0 ºC (32.0 to 122.0 °F)**
- Resolution: 0.01 ppm (mg/L) 0.1% 0.1 °C
- Accuracy @ 25°C/77°F: ±1.5% of reading or ±1 digit ±0.5 ºC
- DO Calibration: one or two points at 0% (HI 7040) and 100% (water saturated air)
- Altitude Compensation Resolution: -500 to 4,000 m (-1640 to 13120’) 100 m (328’)
- Salinity Compensation Resolution: 0 to 40 g/L, 1 g/L
- Temperature Compensation: 0.0 to 50.0ºC (32.0 to 122ºF)
- Temperature Range: -20.0 to 120.0ºC; -4.0 to 248.0°F**
- Temperature Resolution: 0.1ºC; 0.1ºF
- Temperature Accuracy: ±0.5ºC; ±0.9ºF
**Temperature limits will be reduced to actual probe limits
Warranty:
- 2-year warranty
- Electrodes and probes - 6 months